Home Shop Products Transmission Compression Hardware Compression Deadend 2 Piece Comp Deadend 2 Piece Comp DE (Clevis) – PLPTDAC

2 Piece Comp DE (Clevis) – PLPTDAC

SKU: PLPTDAC-000

PLP manufactures a range of compression dead-ends for aluminium based phase conductors, SC/AC and SC/GZ earth wires.

Dead-ends are available in oval eye, tongue or clevis configurations in conjunction with in-line or opposed palms to suit any jumper orientation.

Contact PLP with specific requirements.

SKU – PLPTDAC-000

  • Engineered to hold 100% conductor RTS.
  • Designed for standard crimping dies and presses.
  • Tapered tube design to relieve stress at conductor/Deadend meeting point.

Application Procedures

FI.01

Safety and Application Considerations

  • Do not modify this product in any way.
  • This product is intended for use by qualified linesmen only.
  • When working in an area of energised line with this product, extra care should be taken to prevent accidental electrical contact.
  • Ensure correct procedures are carried out for conductor preparation; incorrect preparation can cause insufficient electrical bonding and/or compromise mechanical strength.
  • Make certain conductor has fully entered the recommended distance into the compression sleeve.
  • Choose correct die size marked on the compression sleeve.
  • Caution: Incorrect die size may cause failure/damage in service.
  • Ensure compression dies are installed correctly into the compression tool.
  • Important: Ensure die faces have completely closed upon compression, if not re-check previous considerations.
  • Safety equipment including glasses should be worn at all times when operating the compression tool.
  • Compression dies are a precision tool and should be maintained and looked after accordingly.
ConductorDimension (mm)Hex Die Code
Catalog Number ACSRBCHHole Separation (mm)AlFe Quantity
PLPTDAC-Hyena-OP-2/M12/50-15 Hyena39520017050DA7DS7
ADD TO QUOTE
PLPTDAC-Coyote-OP-2/M12/50-15 Grape39520017050DA7DS7
ADD TO QUOTE
PLPTDAC-Wolf-OP-2/M12/50-15 Lime42522018050DA8DA8
ADD TO QUOTE
PLPTDAC-Ibis-OP-2/M16/50-15 Ibis49222019550DA9DA8
ADD TO QUOTE