SKU – PLPTDAOE-000
2 Piece Comp DE (Oval Eye) – PLPTDAOE
SKU: PLPTDAOE-000PLP manufactures a range of compression dead-ends for aluminium based phase conductors, SC/AC and SC/GZ earth wires.
Dead-ends are available in oval eye, tongue or clevis configurations in conjunction with in-line or opposed palms to suit any jumper orientation.
Contact PLP with specific requirements.
- Engineered to hold 100% conductor RTS.
- Designed for standard crimping dies and presses.
- Tapered tube design to relieve stress at conductor/Deadend meeting point.
Application Procedures
Safety and Application Considerations
- Do not modify this product in any way.
- This product is intended for use by qualified linesmen only.
- When working in an area of energised line with this product, extra care should be taken to prevent accidental electrical contact.
- Ensure correct procedures are carried out for conductor preparation; incorrect preparation can cause insufficient electrical bonding and/or compromise mechanical strength.
- Make certain conductor has fully entered the recommended distance into the compression sleeve.
- Choose correct die size marked on the compression sleeve.
- Caution: Incorrect die size may cause failure/damage in service.
- Ensure compression dies are installed correctly into the compression tool.
- Important: Ensure die faces have completely closed upon compression, if not re-check previous considerations.
- Safety equipment including glasses should be worn at all times when operating the compression tool.
- Compression dies are a precision tool and should be maintained and looked after accordingly.
Conductor | Dimension (mm) | Hex Die Code | Catalog Number | ACSR | B | C | H | Palm Type | Al | Fe | Quantity |
---|---|---|---|---|---|---|---|---|
PLPTDAOE-HYENA-IL-2/M12/50-0 | Hyena | 375 | 180 | 170 | No. 4 | 25.4AF | 10.1AF | |
PLPTDAOE-GRAPE-IL-2/M12/50-0 | Grape | 380 | 190 | 160 | No. 4 | 28.5AF | 16.0AF | |
PLPTDAOE-LIME-IL-2/M12/50-0 | Lime | 430 | 215 | 190 | No. 4 | 40.0AF | 19.0AF |