SKU – PLPRTDA-000
2 Piece Comp Repair DE (Tongue) – PLPRTDA
SKU: PLPRTDA-000PLP Repair Tongue Deadend Assemblies (PLPRTDA’s) for ACSR conductors are double the length of standard compression tubular Deadend Assemblies. Repair deadends save time at installation when a high resistance fitting needs replacing and minimize the number of joints made within a transmission or distribution system.
PLP’s range of deadend fittings have been developed to suit standard Canadian, British, Australian and New Zealand ACSR conductors from 12mm to 40mm OD and many have been tested mechanically to IEC 61284.
The fittings are all installed with industry standard tooling and can be applied to earth wires as well as phase conductors.
Contact PLP with specific requirements.
- Engineered to hold 100% conductor RTS.
- Designed for standard crimping dies and presses.
- Tapered tube design to relieve stress at conductor/Deadend meeting point.
Application Procedures
Safety and Application Considerations:
- Do not modify this product in any way.
- This product is intended for use by qualified linesmen only.
- When working in an area of energised line with this product, extra care should be taken to prevent accidental electrical contact.
- Ensure correct procedures are carried out for conductor preparation; incorrect preparation can cause insufficient electrical bonding and/or compromise mechanical strength.
- Make certain conductor has fully entered the recommended distance into the compression sleeve.
- Choose correct die size marked on the compression sleeve.
- Caution: Incorrect die size may cause failure/damage in service.
- Ensure compression dies are installed correctly into the compression tool.
- Important: Ensure die faces have completely closed upon compression, if not re-check previous considerations.
- Safety equipment including glasses should be worn at all times when operating the compression tool.
- Compression dies are a precision tool and should be maintained and looked after accordingly.
| Conductor | Dimension (mm) | Hex Die Code | Catalog Number | ACSR | B | C | F | H | Hole Separation (mm) | Al | Fe | Quantity |
|---|---|---|---|---|---|---|---|---|---|
| PLPRTDA-Hyena-OP-2/M16/50-15 | Hyena | 745 | 550 | 17 | 170 | 50 | DA7 | DS7 | |
| PLPRTDA-Coyote-OP-2/M16/50-15 | Coyote | 745 | 550 | 17 | 170 | 50 | DA7 | DS7 | |
| PLPRTDA-Wolf-OP-2/M16/50-15 | Wolf | 820 | 615 | 17 | 180 | 50 | DA8 | DS8 | |
| PLPRTDA-Goat-OP-3/M16/50-15 | Goat | 1015 | 785 | 21 | 205 | 50 | DA10 | DS10 | |
| PLPRTDA-Zebra-OP-3/M16/50-15 | Zebra | 1065 | 785 | 21 | 255 | 50 | DA11 | DS10 | |
| PLPRTDA-Pheasant-OP-4/M16/57x42-15 | Pheasant | 1170 | 865 | 25 | 285 | 57x42 | DA13 | DS12 | |
| PLPRTDA-Moa-OP-4/M16/50x50-15 | Moa | 1340 | 980 | 25 | 335 | 50x50 | DA14 | DS10 | |
| PLPRTDA-Chukar-OP-4/M16/50x50-15 | Chukar | 1340 | 980 | 25 | 335 | 50x50 | DA14 | DS11 |
For custom item request, please enter the code below.
Related products
-
Aluminium Line Guards (ALG’s, ALGS’s)
Select options This product has multiple variants. The options may be chosen on the product page VIEW DETAILS -
2 Piece Comp DE (Clevis) – PLPTDAC
Select options This product has multiple variants. The options may be chosen on the product page VIEW DETAILS -
Full Tension Grips (FTG’s)
Select options This product has multiple variants. The options may be chosen on the product page VIEW DETAILS -
2 Piece Comp DE (Clevis) – Double Palm – PLPTDAC2
Select options This product has multiple variants. The options may be chosen on the product page VIEW DETAILS
